Diamond rings can be classified in a variety of ways, but the most commonly used classification is based on the design, the type of setting, the shape and cut of the diamond, and the metal used to make the ring. Let’s take a look at each type of diamond ring.
Types of Diamond Rings by Design and Number of Gemstones
The most common types of diamond rings are solitaire rings, rings with side stones, and pavé diamond rings.
Solitaire rings are made from a solitaire diamond in a setting, usually held in place by prongs, but also with other settings, such as bezel or tension settings.
A ring with side stones has a central diamond surrounded by smaller diamonds.
One of the most popular variations of side stone rings is a three-stone ring in which one center diamond and two gemstones on each side.
Pavé rings are set with small diamonds, and the shank is attached with tiny metal claws that look like metal droplets. Depending on the design, such rings can only be made from small pavé diamonds, but they can also feature larger solitaire diamonds, or center diamonds with side stones.
Diamond Rings by Setting Type
There are several settings used to hold a diamond in a ring, but here are a few of the most popular:
Prong settings hold the diamond in place with metal protrusions, usually four or six, but there are more cases of prong setting.
A bezel setting is set with a metal band that surrounds the stone in whole or in part. A setting in which only part of the outer edge of the gemstone is held in place by a metal band is called a partial bezel setting.
The invisible setting holds the diamond in a metal frame underneath the diamond, not visible from the top of the ring.
A channel setting, as the name suggests, is a channel that holds the diamond in place on the shank of a ring
Tension settings hold the diamond between the ends of the shank by applying pressure, rather than using prongs, borders, or other types of mounting devices.
Diamond Rings Categorized by Diamond Shape and Cut
Diamond shape refers to the outline of a gemstone, while the term “diamond cut” is more specific and is used to refer to the number, shape, and arrangement of the gemstone’s facets.
Round diamonds are by far the most popular. The classic round cut is designed to maximize the brilliance of the gemstone and surpass other cut gemstones.
Oval cuts are also popular, although not as many as round cuts. There are other popular cuts that are derived from the oval cut: the marquise cut (which has pointed ends instead of round), the pear cut (which is basically an oval cut with a pointed tip), and the heart cut (a type of oval cut with a pointed tip). a sharp end and a crack on the opposite rounded end).
Rectangular cuts include the popular princess cut, emerald cut (rectangular cut with truncated corners) and Asscher cut (square emerald cut), cushion cut (rounded rather than sharp or chamfered), and radiant cut.
The classic triangular cut is known as the trillion cut or triangular cut. The sides of this cut triangular profile can be straight or slightly rounded.
The Type of Metal in a Diamond Ring
The metals most commonly used to make diamond rings are platinum, white gold, and yellow gold.
Due to the color and durability of the metal, platinum rings are one of the most popular diamond-set rings.
White gold diamond rings are also popular because they are relatively inexpensive but still very durable.
Yellow gold rings wear out faster than white or platinum rings because yellow gold is comparatively softer. This material is a particularly good choice for diamonds with lower color grades, as the yellow color of the ring makes the yellow hue in this type of gemstone less noticeable.
Types of Diamond Rings by Style
Rough Diamond Rings and Fine Diamond Rings
If you choose a ring, it is important to consider the thickness of the ring for the following reasons:
First of all, the thickness of the ring, like the type of metal used, is one of the factors that affect the difficulty of resizing the ring. Thicker bands can be difficult to use, especially if they are made of very hard metal.
Secondly, the thickness of the strap determines how quickly it wears out or how easily it bends. This is especially true if the strap is made of a softer metal, such as gold.
Wide Diamond Rings Vs. Narrow Diamond Rings
A ring with a shank that is too wide can make it difficult for you to move your finger. On the other hand, a strap that is too narrow can easily bend or break.
Larger and Smaller Diamonds in Rings
It is important to consider the size of the diamond in relation to the size of the ring to which it is attached.
Larger diamonds will attract more attention, but you should make sure that the ring is large enough to accommodate them. Otherwise, the item may lose balance and move easily when worn.
Smaller diamonds are cheaper per carat, but you should make sure they aren’t too small for the setting. Otherwise, they may come loose and fall.